The purpose of the wall decoration is to protect the wall and extend its service life. It is necessary to understand the decoration of the wall, so that it can be better decorated to achieve the purpose of decoration. In the construction process, it should be carried out in accordance with the process,[url=http://woodcompositedeck.org/composite-decking/outside-waterproof-privacy-fencing.html]outside waterproof privacy fencing[/url]
and different construction processes need to be aware of matters needing attention. Here to understand where to pay attention to in different construction.
In the grass-roots processing to ensure clean, smooth and smooth. To make the wall surface damp-proof, the stone coffin in the coating should be uniform and there should be no difference in thickness. In the concrete and plastering base treatment, the wall surface should be cleaned,[url=http://woodcompositedeck.org/composite-decking/lightweight-waterproof-building-panels.html]lightweight waterproof building panels[/url] scraped putty on the cracks or uneven surface of the wall, polished and then put on mud and plaster.
The construction requirement is that the wall surface is flat and no error of more than 10 mm can occur. If there is a large error, a wooden block is added between the wall surface and the keel. According to the height of the wainscot and the size of the room, nails are made. Installed in the wooden wall skirts, immediately painted the wall surface treatment, brushing oil, to prevent other types of work on the board surface pollution. The wall should be dry after construction.
Renovation Wall Precautions - Stone Wall Decoration
Natural stone is relatively heavy. In order to ensure safety, a double insurance method is adopted, that is, the sheet metal and the grass roots are tied with copper wire and then cement mortar is poured. The wall construction process should be carried out first, followed by the installation of the basic steel mesh,[url=http://woodcompositedeck.org/eco-panel/wood-composite-flooring-wpc-deck-board.html]wood composite flooring wpc deck board[/url] then the plate drilling, binding the sheet, filling with mud, embedding the gap, and finally polishing.